weberepox easy New Product
Weberepox easy is a two component, easy to use, epoxy based tile adhesive and grout. It is suitable for all types of tiles and stones on the floor and wall. It is especially recommended for hygiene sensitive areas and also areas which require sterile conditions.
When components of weberepox easy are mixed, it forms a smooth, creamy & thixotropic paste, which makes it easy to mix, easy to apply, easy to clean, and easy to maintain. At the same time, it also provides high mechanical and chemical resistance properties. The resultant is, an easy to use, high durability grout, which is available in an attractive range of colors
- The tiles/stones should be firmly set & the adhesive or mortar should be completely dry.
- Remove the spacers should before grouting.
- Grout joints must be clean and free of standing water, dirt, dust & foreign matter.
- Remove the excess of adhesive or mortar from the joint area.
- Do not clean the tiles/stones with acid cleaners. All joints to be clean by washing with water/detergent.
- Any water or moisture present during grouting will reduce the performance of the grout.
- Ensure the joints are completely dry before grouting.
- For grout joints between 2 mm - 12 mm
- Easy to mix, creamy consistency high productivity grout
- Can be applied on wall and floor
- Highly thixotropic - non - sag formula can be used as both grout and adhesive on floor & wall
- Easy to apply
- Early flexural properties
- High resistance to abrasion
- High Compressive strength
- Low water absorption results in watertight joints
- Resistance to stain & chemicals.
- Hygienic in service & would not allow bacterial growth
- Low VOC - Over curing full reaction takes place.
- Available in wide range of colors.